When you place rugs and carpets in your home, one of the biggest problems you come across is the cleaning and maintenance of these things. People tend to find themselves struggling to keep the rugs clean and shining. Regardless of how luxury and good rug you get for your home, if it is kept clean, it will look great. However, if you overlook the maintenance the rug will wear off with the passage of time and soon it will look old and ugly. Therefore, it is important for you to take care of your carpets and you may look up to professional companies for rug cleaning Lower East Side.
However, if you want to move ahead and do the cleaning on your own, here is a step by step guide on how to get rid of the dirt and dust from your fiber and cotton area rugs.
Start by vacuuming the product and make sure that you completely go across the rug. There are people who use vacuums that are not suitable for the carpet and rug cleaning purpose. Moreover, the material of your rug matters a lot when you are vacuuming it. Make sure that your vacuum supports rug cleaning or else you will run into problems. It may not clean the rug at all or you may end up destroying your lavish carpets because of the mismatch between vacuum brush and carpet material.
Take it out
Now, take the carpet outside and start whacking it with a broom. Make sure that you have gone through with the vacuum on both sides of the carpet. Whacking the back of your rug with broom helps in getting rid of all the dust that resides inside it. However, keep in mind that the back of your rug supports your whacking and don’t go in with all the force. Going too hard on the rugs that have latex back means that you’ll end up destroying the rug.
Now, lay down the rug on a deck and get yourself a water supply. Get a good carpet shampoo from a nearby departmental store and read the instructions label carefully. Slowly and steadily shampoo throughout your rug as instructed. There are individuals who don’t have carpet shampoo or wish to make one on their own. If this is the case, get some warm water and a tablespoon of dish soap. Make sure that the dish soap isn’t too hard.
Regardless of which shampoo you use, don’t forget to spot test it. This provides you assurance that it complies with the fiber of your rug and won’t decolorize or destroy it.
Drying and vacuuming
Once you are done with the shampoo and got all the rug cleared out with the help of water, dry it out. Don’t try to experiment and let the rug air dry for a while. It may take up to 24 hours or even more depending on the rug you have. Once it is dry, put it back in your home and vacuum it once again.
So, this is what you can do to clear out your area rugs. If you find it a bit tough or want to save time and energy, you can always call in professional rug cleaning Lower East Side.